300kN结构木材特性试验机用于规格材力学性能试验、木结构部件力学性能试验、框架部件力学性能试验、LVL层积木力学性能试验、PSL平行积成木力学性能试验、胶合层积木力学性能试验、原木材力学性能试验。300kN结构木材特性试验机测试木材顺纹抗拉强度、横纹抗拉强度、顺纹抗压强度和弹性模量、木材顺纹抗剪强度、接缝抗剪强度、木材弯曲强度和弹性模量；HRJ Tester；测定木材垂直抗压承载力、木材抗拉承载力、木材横向承载力、木材扭转刚度。
300kN结构木材特性试验机拉伸强度试验间距＞2900mm；结构木材抗压强度试验间距＞2900mm；结构木材弯曲强度试验间距＞2900mm；结构木材特性试验开具＞800mm；拉压规格材名义尺寸2"x4"（45*95mm）；HRJ-Test英文版木材特性测试软件（ISO、JIS、ASTM、DIN、BS、NF、EN、AS、NZS、NBR、IEC、GOST、CNS、APA)；
AS/NZS 4063.1:2010；AS/NZS 4357.2；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；HRJ Tester；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294：2011；ASTM D5055-2013；HRJ Tester；ASTM D3528；NF B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；BS EN 1912：2012；GB 50005-2017；HRJ Tester；GB 50009-2012；GB 50206-2012；GB/T26899-2011；GB/T17659.1-2018；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；GB/T50329-2012；GB/T50708-2012；GB/T50772-2012；HRJ Tester；GB/T51233-2016；GB/T51226-2017；LY/T1927-2010；jnshiyanji；LY/T2228-2013；LY/T2388-2014；JGJ/T265-2012；规格材材质等级检验方法；木结构试验方法；木材强度等级检验方法；建筑结构荷载规范；受弯木结构力学性能检验方法；木基结构板材力学性能指标；HRJ Tester；集成材理化性能试验方法；木结构工程施工质量验收规范；胶合木结构技术规范；规格材目测分级规则；木结构设计标准；建筑工程方木原木结构设计；建筑工程轻型木结构设计；原木及板材材质标准；建筑工程承重胶合木结构设计；原木锯材批量检查抽样判定方法；多高层木结构建筑技术标准；装配式木结构建筑技术标准；轻型木结构用指接规格材；轻型木结构连接件通用技术条件；轻型木结构锯材用原木检验；HRJ Tester；轻型木桁架技术规范；应力分级木材；300kN规格材特性试验机；300kN木结构弯曲强度试验机；300kN结构木材抗剪强度试验机；600kN木结构力学性能试验机；HRJ Tester；100kN长试件木材强度试验机；120kN大跨度木材力学试验机；200kN集成材力学性能试验机；jnshiyanji；600kN原木板材力学试验机；1000kN木结构荷载强度试验机；
Structural Timber Characterization Tester；HRJ Tester；Dimension Lumber Characterization Tester；Characterization of structural timber-Test methods；Stress-graded Timber；Bending Strength and Apparent Modulus of Elasticity；Tension Strength Parallel to Grain；Compression Strength Parallel to Grain；Beam Shear Strength；HRJ Tester；Bearing Strength Perpendicular to Grain；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain；Compression Strength and Modulus of Elasticity Perpendicular to Grain；Shear Strength at Joint Details；Testing Rectangular Sections of Sawn Solid Timber；HRJ Tester；Structural laminated veneer lumber (LVL) Test methods；Determination of structural properties-Test methods；Determination of mechanical properties of wood based panels；Determination of modulus of elasticity in bending and of bending strength；Plywood Bonding quality Test methods；HRJ Tester；Determination of tensile strength perpendicular to the plane of the board；Sampling and cutting of test pieces and expression of test results；Test method of evaluating the properties of glued-laminated timber；Visual grading rules for dimension lumber in light wood frame construction；HRJ Tester；Code for design of timber structures；Load code for the design of building structures；Code for acceptance of construction quality of timber structures；Technical code of glude laminated timber structures；Finger jointed structural dimension lumber in light wood frame construction；HRJ Tester；General specification for connector of light wood-frame construction；Log for lumber in light wood frame construction；Code for construction of timber structures；Technical code for light wood trusses；Sampling and judging methods for lot inspection of logs；HRJ Tester；Sampling and judging methods for lot inspection of sawn timbers；Tension Strength Hydraulically Operated Fixture；Standard for methods testing of timber structures；HRJ Material Testing Machine；HRJ Various Testing Machines；HRJ Laboratory Equipment；Testing Machines Manufacturer；Mechanics Tester Manufacturer；Tester Service Center；Tester Fittings Supply Center；Test Accessories Design Manufacture Center；Special Test Accessories Center；Testing Machine Accessories；Material Tester Attachment；Material Tester Fixture； |
