DTM-1000水泥包装袋跌落牢固度试验机，依据GB/T9774-2020水泥包装袋，装载质量≤50kg各类型水泥包装袋牢固度测定，垂直跌落不破次数不少于6次。以5条样袋跌落次数表示，当5条样袋跌落不破次数均不小于6次时，判定牢固度合格。
2kN复膜塑编袋物理力学试验机；5kN水泥包装袋拉伸负荷试验机；2kN纸塑复合袋力学性能试验机；25kg三层伸性纸袋牢固度试验机；50kg方底阀口袋跌落试验机；跌落性试验破包的判定原则；FIBC-2000集装袋跌落试验机；DTM-2500运输包装件跌落试验机；10kN纸管压力试验机；5kN纸护角抗压弯曲试验机；100kN大跨度包装箱压力试验机；300kN包装箱堆码压力试验机；200kN集装袋周期性提吊试验机；50kN集装袋基布拉力试验机；2kN集装袋连接部拉力试验机；200kN集装袋撕裂传播试验机；100kN焊机跌落提升试验机；50kN振动冲击隔离器静刚度试验机；HST-D50kN热熔对接接头高速拉伸冲击试验机；低温环境混凝土拉伸冲击试验机；1500mm门窗型材落锤冲击试验机；MJL-10纸面石膏板冲击性能测定仪；1000g1500g散热器水箱落球冲击测试仪；WBC-10N.m焊接电源冲击试验机；GB/T7968-2015纸袋纸；GB/T8946-2013 塑料编织袋；GB/T24287-2009伸性纸袋纸；GB/T25162.2-2010热塑性软质薄膜袋；GB/T4857.17-2017；GB/T4857.3-2008静载荷堆码试验；QB/T2155-2018；GB/T4857.4-2008采用压力试验机进行的抗压和堆码试验；GB/T4857.5跌落试验方法；GB/T4857.6滚动试验；GB/T4857.7-2005正弦定频振动试验；GB/T4857.10-2005正弦变频振动试验；GB/T4857.11-2005水平冲击试验；GB/T4857.14倾翻试验；GB/T4857.15-2017可控水平冲击试验；GB/T4857.20碰撞试验；BB/T0076-2018；GB/T4857.22单元货物稳定性试验；GB/T4857.23-2012随机振动试验；GB/T4857.1-2019；GB/T4857.13-2005；GB/T4857.2-2005；GB/T4857.9-2008；ISO 4180:2009；ISO 2206；ISO 8318:2000；ISO 2244:2000；ISO 4874；ISO 2873:2000；ISO 8768；ISO 4178；ISO 2233:2000；ISO 10531；ASTM D4728；ASTM D4169；ISO 2234：2000；ISO 12048；ISO 2248；ISO 2876；ISO 2247:2000；ISO 2875:2000；GB 6975-2013E；ISO 7965-2；BS EN 22248；跌落试验机，跌落高度：300-1500mm,专用于测试产品包装受到坠落之受损情况，及评估运输搬运过程时耐冲击强度。采用双柱导向、高度跌落次数可置，工作稳定可靠，可实现棱、面、角跌落，满足GB/T4857.5-92、ISO2248-1972E。本机采用光电控制，可设定七档跌落高度，也可自由选择跌落高度，跌落释放采用电磁控制，能使试样瞬间自由落下，对包装容器进行之棱、角、平面进行跌落冲击试验。跌落试验机分类：单臂跌落试验机，双臂跌落试验机。GB/T9174-2008；GH/T1089-2013；GH/T1279-2019；MH/T1014-2004；QB/T1588.5-2016；SB/T11102-2014；SN/T0717-2013电器仪表类商品运输包装检验；GB 6944-2012；GB/T4879-2016；GB/T5048-2017防潮包装；GB/T7311-2008；SN/T1936.2-2007出口危险货物大包装检验性能检验；GB/T8166-2011缓冲包装；SN/T1039-2020；SN/T1039-2020；20kN碳化硅制品抗折强度试验机；SN/T0183-2014；SN/T3733-2013；SN/T1259；SN/T0264；SN/T0893出口危险货物塑编集装袋性能检验；SN/T1266；SN/T4788-2017集装袋顶吊试验；SN/T4789-2017；SN/T5160-2019；YZ/T0167-2018快件集装容器集装袋；GB/T17448；TB/T2689.3-2018；TB/T2689.4-2018；EN 1898-2000；NF H34-012；BS EN277；JIS Z1651-2017；JIS Z 0108；ISO 21898-FIBCs；AS 3668-2019；BS 6382；ISO 2206；ISO 21067；YZ/T0166-2018；YZ/T0171-2019；GB/T8946-2013；GB/T25162.2-2010；GB/T4857.1-2019；GB/T4122.1-2008；QB/T2920-2018；QB/T2922-2018；QB/T2919-2018；QB/T5246-2018；QB/T5247-2018；BB/T0016-2018；
Cement Packing Sacks Drop Tester；Sacks for packing cement；FIBC Drop Testing Machine；Package Examination Testing Machine；Bag paper tensile tester；General technical requirements of plastic woven sack；Extensible bag paper tensile tester；Sacks Drop test Sacks made from thermoplastic flexible film；General rules for the compilation of performance tester；Identification of parts when testing；Sinusoidal vibration test method using at variable vibration frequency；Horizontal impact testing；Water immersion testing；Low pressure tester；Packaging Transport packages Toppling testing；Transport packages Bump tester；Packaging Transport packages Unit loads stability tester；Random vibration tester；Compression and Stacking tests using a compression tester；Packaging Water spray tester；Packaging Transport packages Rolling tester；Sinusoidal vibration tester；Flexible Intermediate Bulk Container Tester；Paper Tube Compression Tester；Paper Edge Corner Flexure Tester；Transport Packages Compression Stacking Tester；Packing Box Compression Stacking Tester；Welding power source Lift and Drop Tester；Cable clamp Rotary Bending Endurance Tester；Transport Packages Vertical Impact Dropping Tester；Vibration Shock Isolators Static Stiffness Tester；Butt Fusion Joints High-speed Tensile-Impact Tester；Gypsum Plate Board Falling Ball Impact Tester；Falling Steel ball Impact Tester；Welding power source Impact Tester； |
