500kN.m联轴器扭矩标定预磨试验测试系统，用于风力发电机组联轴器扭矩预磨和标定测试，联轴器极限扭转强度测试、扭转刚度测试、连续打滑疲劳测试，实现间歇性测试和连续性测试。精确控制转角和扭矩，实时显示扭矩-角度曲线、扭矩-时间曲线、角度-时间曲线等。标定工位检测联轴器零部件扭矩和对应出现的弧度角度，评估风力发电机组联轴器力学性能。
200kN.m风力发电机组联轴器扭矩试验系统；风电机组联轴器静态极限扭矩试验静态动态变位能力试验最大启动扭矩制动扭矩试验极限转速试验周期运转试验；风电机组联轴器运行工况下位移值测试；NB/T10995-2022风力发电机组高速轴联轴器技术规范；1.5MW～9.0MW风力发电机组联轴器扭矩试验系统；大功率汽轮机组风电减振联轴器试验系统；联轴器橡胶连杆疲劳寿命试验系统；膜片滑动摆动旋转三维变量荷载耐久性测试系统；轨道交通联轴器膜片拉扭摆服役性能测试系统；梅花联轴器拉扭摆疲劳耐久试验系统；摩擦式钢球式滚珠式扭矩限制器寿命测试系统；联轴器脉冲荷载交变荷载冲击扭矩试验系统；单扭臂双扭臂制动器扭矩疲劳试验机；刹车盘制动扭矩疲劳试验机系统；NB/T10571-2021风电机组联轴器检修技术规程；传动轴整体扭转刚度测试系统；联轴器极限扭转强度试验连续打滑疲劳间歇性连续性测试系统；GB/T38965-2020膜片联轴器试验要求；GB/T38768-2020橡胶联轴器试验要求及方法；联轴器轴向径向扭转静态刚度试验系统；IEC 61400-23；DL/T793.6-2019发电设备可靠性评价规程第6部分风力发电机组；GA 1800.4-2021电力系统治安反恐防范要求第4部分风力发电企业；GB/T18451.1-2022风力发电机组设计要求；GB/T19068.2-2017小型风力发电机组试验方法；GB/T19072-2022风力发电机组塔架； GB/T19960-2024风能发电系统 风力发电机组通用技术条件和试验方法；GB/T25384-2018风力发电机组 风轮叶片全尺寸结构试验；医学组织工程医疗器械设备生物材料力学检验测试系统；SWC大型整体叉头十字轴式万向联轴器；千斤顶检定装置反力架结构加载试验系统；墙体及吊顶轻钢龙骨静载冲击综合性能试验机；空气弹簧刚度气密性试验机；铁路道岔转辙机挤脱力试验机；TB/T3311-机车车辆联轴器；1500kN钢轨裂纹监测试验机；3000kN微机控制钢静弯试验机；500kN混凝土轨枕静载试验机；引导轮疲劳耐久性试验测试系统；HAT2000Nm高强螺栓轴力扭矩拉扭自动测试仪；200N.m浮动油封跑合磨损泄漏性能试验机；密封圈模拟实际工况高低温压扭耐久试验机；线缆拉力试验套管成型快速液压机；支重轮磨合跑合疲劳耐久寿命试验机；浮封环密封荷载面压试验机；300kN装载机挖掘力提升力试验机；金属波纹管垂向横向二维高温压力疲劳试验机；掘进机盘形滚刀摩擦磨损疲劳寿命试验测试系统；通信光缆光纤接头盒连接器扭转弯曲疲劳试验机；锚杆锚固旋转搅拌轴力扭力疲劳循环伺服试验机；300kN结构木材集成材力学特性试验机；300kN规格材拉压弯剪强度性能试验机；600kN木结构原木板材力学性能试验机；大跨度木材人造板抗弯强度试验机；滚刀刀圈耐磨损抗冲击疲劳试验机；木结构荷载强度试验机；胶合纤维人造板木工板木质地板结构板集装箱木板材力学试验机；脚手架木模板拼装式胶合板箱力学强度试验机；400kN木质工字梁静曲强度性能试验机；200T无振动伺服控制钢绞线拉伸试验机；
Couplings Torque Calibration Pregrinding Test system；Used for pre-grinding and calibration test of components, ultimate torsonal strength test,overall torsional stiffness test of drive shaft,continuous skid fatigue test intermittent and continuous testing can be realized used to test torque and corresponding angle of the coupling and other parts to evaluate their mechanical properties；Wind Turbines Couplings Torque Test System；No Vibration Steel Bars Tensile Strength Tester；Construction Machinery Heavy Equipment Transport Vehicles Component Dynamic Fatigue Test System；Medical Engineering Medical Device Product Biological Materials Mechanical Test System；Rail Transit Highway Water Transportation Construction Material Engineering Quality Test System；Hydraulic Servo Universal Material Tester Horizontal Tensile Testing Machine；Steel Strand Relaxation Static Load Anchoring Tester；Tension Creep Rupture Strength Tester；Hydraulic Servo Constant Stress Compressive Tester；Hydraulic Jack Verification Multi-functional Test System；Laminated Veneer lumber Structural Timber Wood Mechanical Properties Test；Metal Wire Material Bolt Connection Components Torsion Properties Test；Spring Tension Compression Torsion Fatigue Stiffness Properties Test；High Low speed Tensile Compression Test；Electronic Universal Tension Compression Flexural Torsion Material Test；Steel Bar Steel Tube Metal Material Components Member Flexural Test；Mechanics Calibration Verification Standard Machine；Special Custom Non-Standard New Scientific Research Test System；No Vibration Servo Steel Strand Tensile Tester；Servo Steel Strand Skew Tensile Tester；Metallic Materials Tensile Stress Relaxation Tester；Steel Strand High Temperature Relaxation Tester；Steel Wires Steel Bars High Temperature Relaxation Tester；Static Load Anchoring Testing Machine；Steel Strand Anchor Plate Strength Static Load Tester；Tensile Creep Rupture Strength Testing Machine；Battery Packs Mechanical Strength 3 Station Creep Tester；Tunnel Boring Machine Disc Cutter Friction Wear Fatigue Life Tester；Code of reliability evaluation for generating equipment；Wind turbines Tower；General technical specification and test method of wind turbines；Wind energy generation system；Wind turbines-Full scale structural testing of rotor blade； |
