WLDT-30kN/60kN/100kN/120kN焊机跌落提升试验机，用于等离子切割电源(plasma cutting power source)、弧焊电源(Arc welding power source)、电压驱动焊接电源、机械设备驱动焊接电源等焊接电源机械性能测试及研究。
→交流弧焊机、直流电焊机、氩弧焊机、二氧化碳保护焊机、对焊机、点焊机、埋弧焊机、高频焊逢机、闪光对焊机、压焊机、碰焊机、激光焊机、交流焊机和直流焊机、螺栓焊机等各类型电焊机（electric welding machine）的焊接电源机械性能测试及研究。
→提升吊环或提升凸耳、提升绳索或提升手柄承受装配完整的焊接电源静态拉伸试验力测试及研究。
→焊接电源装入所有带电部件和危险性的运动部件(如滑轮、皮带、风扇和齿轮等)进行跌落机械性能测试及研究。
→焊接电源结构件及外壳材料强度、抵抗触电危险性能测试及研究。
→发动机驱动的焊接电源，在装配完整并准备使用状态下进行跌落性能测试及研究。
→用于为工业和专业用途而设计的电压供电或由机械设备驱动的弧焊和类似工艺所用的电源。
→提供电流和电压，并具有适合于弧焊和类似工艺所需特性的设备。
IEC 60038； 全国电焊机标准化技术委员会（SAC/TC 70）； GB/T15579.10-2020弧焊设备电磁兼容性(EMC)要求；GB/T15579.11-弧焊设备电焊钳；GB/T15579.12-焊接电缆耦合装置；GB/T15579.13-弧焊设备焊接夹钳；GB/T15579.14-2021弧焊设备校准、确认和一致性试验；GB/T15579.2-液体冷却系统；GB/T15579.3-引弧和稳弧装置；GB/T15579.4-周期检查和试验；GB/T15579.5-2023弧焊设备送丝装置；GB/T15579.6-限制负载的设备；GB/T15579.7-2023弧焊设备焊炬(枪)；GB/T15579.8-焊接和等离子切割系统的气路装置；GB/T15579.9-弧焊设备安装和使用；10Nm焊接电源冲击试验机；电力电子能源动力电气工程测试系统；户外机柜机械性能力学试验机；300N.m通信光缆光纤接头盒连接器扭转弯曲疲劳试验机；500kN线缆拉力试验套管成型快速液压机；10kN光缆光纤接头盒连接器分纤箱接续箱卧式拉伸试验机；1000kN复合绝缘子芯棒应力腐蚀试验机；锂电池极片涂布180°剥离试验机；500kN电线电缆电力金具卧式拉伸试验机；电气连接器综合强度试验机(接触件及引出端的机械试验)；￠150mm电缆及电缆护套夹紧装置抗拉拔力及接线强度试验机(接触件固定性试验，绝缘安装板固定性试验)；电气连接器插拔力试验机；200N.m电缆夹扭转耐力试验机(偏斜45°～50°旋转360°)；240mm²电缆夹旋转弯曲耐力试验机；电缆夹机械应力90°循环旋转弯曲耐力试验机；电池包组机械强度多工位蠕变持久试验机；变压器波纹储油柜耐压试验变形自动检测装置；20kN.m500kN高压绝缘子组件拉压弯扭综合试验台；10000N.m300kN绝缘子拉压弯扭试验机；100kN铁路接触网张力测量仪校准装置；50kN线夹对地线导线握力试验机；
Welding power source Lift and Drop Testing Machine；Arc welding equipment-Part1 Welding power sources；Part2:Liquid cooling systems；Part3:Arc striking and stabilizing devices；Part4:Periodic inspection and testing；Part5:Wire feeders；Part5:Wire feeders；Part7:Torches；Part8:Gas consoles for welding and plasma cutting systems；Part9:Installation and use；Part11:Electrode holders；Part12:Coupling devices for welding cables；Part13:Welding clamp；Part14:Calibration,validation and consistency testing；National Welding Standardization Technical Committee；IEC standard voltages；Welding power source Impact Testing Machine；Oil-immersed Transformer Corrugated Oil Storage Tank Fatigue Test Bench；Power Electronics Energy Power Electrical Engineering Test System；Transformer Ripple Oil Conservator Withstand Experimental deformation Automatic detection Device；Automatic Deformation Detection Device for Withstand Voltage Test of Transformer Ripple Oil Conservator；Composite Insulator Component Tension Compression Bending Torsion Test System；Clamp grip force on ground wire conductor Tester；Composite Insulator Core Stress Corrosion Tester；Railway Overhead Lines Tension Tester Verification Device；Cable Tension Test Sleeve Forming Rapid Hydraulic Machine；Outdoor Cabinets Mechanical Properties Tester；Optical Fibre Cables Torsion Bending Fatigue Tester；Optical Cables Splice Torsion Bending Fatigue Tester；Optical Fiber Splice Torsion Bending Fatigue Tester；Optical Fiber Connector Torsion Bending Fatigue Tester；Electric Connector Synthetical Strength Tester；Electric Connector Plugging Force Testing Machine；Cable clamp Torsion Endurance Tester；Cable clamp Rotary Bending Endurance Tester；Electric Cables and Wires Horizontal Tensile Testing Machine；Optical Fibres Cables Horizontal Tensile Testing Machine；Optical Fiber Cable Distribution Box Tensile Tester；Optical Fiber Splice Closure Tensile Tester；Fiber Optical Splice Box Tensile Tester；Horizontal Tensile Testing Machine for Closure；Horizontal Tensile Testing Machine for Optical Fibers and Cables；Lithium Battery Coating Peel Adhesion Properties Tester；The code of distribution transformer operation； |
